Puncy Hallmarks Punzierungsstempel

Zamówienie

Przygotowujemy się do Ciebie i stronach w języku polskim. Jak dotąd, tylko na krótko.

Szanowny kliencie!

Pozwólcie nam zaoferować Państwu produkty naszej firmy.

Uprzejmie informuję, że przed zamówieniem cechownika jest potrzeba się zastanowić do ilu sztuk jest nam cechownik potrzebny.Jeśli potrzebujemy małą ilość ocechować to wystarczy ręczny cechownik (wybijanie za pomocą młotka), oczywiście jeśli chodzi o większą ilość to się wypłaci zamówić maszynkę do cechowania.

Cechy i firmowe loga zrobimy według waszego graficznego projektu, który proszę wyslać na mój email i w tabelce proszę wybrać typ cejchu oraz rozmiar.

Rozmiar od 0.4 mm

Cena cechu zależy od stopnia trudności od 18 Euro. (możliwość indywidualnego umówienia)

Cena cechu prób od 13 Euro.

Zamówienia się płaci z góry bankowym przelewem na konto.

Termin dostawy: cechy prób od rázu po zamówieniu.

Firmowe loga 1 - 2 tygodnie (zależy od stopnia trudności)

Shape of tool
Relief / Recessed in the surface
Contour
Design
1
1
0,3 - 1,2 mm
  • Tool for marking into rings (tool with milled window). Tool intended for marking with hammer.
  • Standard and universal form of tool used mainly in the Czech Republic, the Slovak Republic and Switzerland.
  • 10 x 10 mm, height contour motif from 0.3 to 1.2 mm.
2
2
0,3 - 1,2 mm
  • Bent and machined tool intended for marking with hammer.
  • This (standard) shape is used in Germany and in many other countries.
  • The radius of the tool 4.5 mm; The height of the motif is from 0.3 to 1.2 mm.
3
3
0,3 - 9 mm
  • Tool with square base; Straight; Intended for hammer.
  • Standard shape of marking tool which is used everywhere in the world. It is suitable for larger text and motifs.
  • 10 x 10 mm; Height of the contour of the motive from 0.3 to 9 mm.
4
4
0,3 - 1,2 mm
  • Tool for marking into rings (tool with milled window). Tool intended for marking with marking machine; Possibility of manual marking.
  • Standard and universal shape of a marking tool used mainly in the Czech Republic and the Slovak Republic. Machine version.
  • 10 x 10 mm; Height of the contour of the motive from 0.3 to 1.2 mm.
5
5
0,3 - 1,2 mm
  • Tool with square base; Part of the production is turning; Straight; Intended for marking with machine; Possibility to mark manually.
  • .
  • 10 x 10 mm; Height of the contour of the motive from 0.3 to 1.2 mm.
6
6
0,3 - 1,2 mm
  • Bent and milled tool intended for marking into rings. Marking with hammer.
  • Type of marking tool used mainly in the Netherlands.
  • Tool radius is 4.5 mm with flat along the length; the height of the contour of the motive from 0.3 to 1.2 mm.
7
7
0,3 - 1,2 mm
  • Tools is made by turning, Straight; Intended for marking with hammer.
  • Type of marking tool used mainly in the Netherlands.
  • Tool radius 4.5 mm with flat along the length; Height of the contour of the motive from 0.3 to 1.2 mm.
8
8
0,3 - 1,2 mm
  • Bent and milled tool; Tool intended for marking with hammer.
  • This (standard) shape of marking tool is used in Germany and in many other countries.
  • 8 x 8 mm, Height of the contour of the motive from 0.3 to 1.2 mm.
9
9
0,3 - 3 mm
  • Tool with square base; Tools is made by turning; Straight; Intended for marking with hammer.
  • The standard shape of the tool used mainly in the Czech Republic, the Slovak Republic and Switzerland.
  • 5 x 5 mm or 6 mm x 6 mm, the height of contour of motif from 0.3 to 3 mm.
10
10
0,3 - 1,2 mm
  • The tool is forged and milled; Intended for marking with hammer.
  • This (standard) shape is used in Germany, Switzerland, but also in other countries.
  • Its production is more challenging because the bend is reinforced with hand-forged. It is popular with demanding customers..
  • 7 x 7 mm, Height of the contour of the motive from 0.3 to 1.2 mm.
11
11
0,3 - 0,8 mm
  • Tool into marking pliers.
  • Height of the contour of the motive from 0.3 to 0.8 mm.
12
12
  • Tool for big logo or text.
Z - Recessed in a surface
Z
  • Recessed version is used for purity mark, manufacturing and brand responsibility, as well as for logos in the Czech Republic, the Slovak Republic and in other Countries.
  • It is suitable for sizes ranging from 0.4 mm to 2 mm.
V - Relief
V
  • Height of the contour of the motive from 0.3 to 1.2 mm.
  • It is suitable for sizes ranging from 0.3 mm to 2 mm.
1
Rectangle
1
2
Ellipse
2
3
Circle
3
4
Rhombus
4
5
Hexagon
5
6
Other - please specify in the note
6
A3
0,5 - 0,8 mm
A3
A4
0,5 - 0,8 mm
A4
A9
0,5 - 0,8 mm
A9
A13
0,5 - 0,8 mm
A13
See all suggestions
A1 A1 - 333, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A2 A2 - 375, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A3 A3 - 585, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A4 A4 - 750, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A5 A5 - 800, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A6 A6 - 835, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A7 A7 - 850, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A8 A8 - 900, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A9 A9 - 925, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A10 A10 - 959, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A11 A11 - 950, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A12 A12 - 986, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
A13 A13 - 999, Recessed
  • Purity mark standard and recessed.
  • Sizes 0,5 mm a 0,8 mm.
B B - 585, Raised, without contour
  • Purity mark raised, without contour.
  • Sizes 0,3 mm, 0,5 mm a 0,8 mm.
C1 C1 - 585, Recessed, oval
  • Purity mark oval recessed.
  • Size 0,7 mm.
C2 C2 - 925, Recessed, oval
  • Purity mark oval recessed.
  • Size 0,7 mm.
D1 D1 - 950, Recessed, rhombus
  • Purity mark rhombus, recessed.
  • Size 1 mm.
D2 D2 - 925, Recessed, rhombus
  • Purity mark rhombus, recessed.
  • Size 1 mm.
E E - 585, Raised, with contour
  • Purity mark raised with contour.
  • Size 0,7 mm.
F1 F1 - 925, Raised, with contour
  • Purity marks raised, with the contour, mark follows the radius of 10 mm, therefore it is suitable for rings.
  • Size 1mm.
F2 F2 - 750, Raised, with contour
  • Purity marks raised, with the contour, mark follows the radius of 10 mm, therefore it is suitable for rings.
  • Size 1mm.
F3 F3 - 585, Raised, with contour
  • Purity marks raised, with the contour, mark follows the radius of 10 mm, therefore it is suitable for rings.
  • Size 1mm.
G G - 750, Raised, rhombus
  • Purity mark rhombus; raised.
  • Size 1mm.
H H - 14ct, Recessed
  • Purity mark; recessed.
  • Size 0,7 mm.
Ch1 Ch1 - 585/14, Recessed
  • Purity mark; recessed.
  • Size 0,5 mm.
Ch2 Ch2 - 417/10, Recessed
  • Purity mark; recessed.
  • Size 0,5 mm.
Ch3 Ch3 - 750/18, Recessed
  • Purity mark; recessed.
  • Size 0,5 mm.
Ch4 Ch4 - 333/8, Recessed
  • Purity mark; recessed.
  • Size 0,5 mm.
Ch5 Ch5 - 375/9, Recessed
  • Purity mark; recessed.
  • Size 0,5 mm.
Ch6 Ch6 - 916/18, Recessed
  • Purity mark; recessed.
  • Size 0,5 mm.
I1 I1 - M, Circle
  • M sign for the products of common metal
  • Size 0,6 mm.
I2 I2 - M, Square
  • M sign for the products of common metal
  • Size 0,6 mm.
J J - MET
  • MET sign for the products of common metal.
  • Size 0,6 mm.
K K - METAL
  • METAL sign for the products of common metal
  • Size 0,4 mm.
L L - Ti
  • Sign for titanium.
  • Size 1,2 mm.
M M - M
  • M sign for the products of common metal.
  • Size 0,7 mm.
N N - Manufacturing
  • Example of manufacturing mark.
  • Size 1,5 mm.
O O - Hand Made
  • Suitable for hand-made products.
Special order (logo, responsibility brand)

Other products

Ordering table

Shape of tool Relief / Recessed in the surface Contour Design Size Number of ordered pieces